Model Fuzzy MADM in The Decision Support System of Mustahik Service Program Beneficiaries at Laznas PPPA Daarul Quran Center Tangerang

Authors

  • Lukman Nulhakim STMIK Antar Bangsa
  • Doni Andriansyah STMIK Nusa Mandiri
  • Firda Devia Putri STMIK Antar Bangsa

DOI:

https://doi.org/10.34306/conferenceseries.v3i1.379

Keywords:

decision support system, SAW, fuzzy MADM, mustahik, donation

Abstract

Charity is one of the good deeds taught in Islam. Doing charity is giving out or donating a piece of the property or money to someone else. The amil institution is one of the places where they receive donations and distribute them to those who are entitled. One of the amil institutions is Laznas PPPA Daarul Quran that has a mustahik service program where they must be focused on providing educational, health, venture capital, or other aid to mustahik. The problem we found is that mustahik selection is still conducted by hand, resulting in the lack of accuracy of mustahik. There are eight criteria in determining the mustahik; fardhu prayer, family income, reading Al-Quran, sunnah prayer, social activities, number of loads, residence, and marital status. The purpose of this research is to build a decision support system to facilitate the management and distribution of aid to make it more targeted. The method used in this research is Simple Additive Weighting or SAW with a model Fuzzy Multi-Attribute Decision Making or FMADM. The method is selected because it can choose the best alternative by calculating and weighting the weight value of any criteria, and then proceed to determining the mustahik and giving help based on the number of funds available.

References

D. Andriansyah, “Penerapan Model Waterfall Pada Sistem Informasi Layanan Jasa Laundry Berbasis Web,” Indones. J. Softw. Eng., vol. 4, no. 1, 2018, doi: 10.31294/ijse.v4i1.6291.

D. Andriansyah, “Model Rapid Application Development e-Request Promotion Materials Pada Citilink Menggunakan Framework Bootstrap,” vol.6, no. 3, 2017.

E. Haerani and R. Ramdaril, “Sistem Pendukung Keputusan Pendistribusian Zakat Menggunakan Fuzzy Multiple Attribute Decision Making (FMADM) Dan Simple Additive Weighting (SAW) Pada Baznas Kota Pekanbaru,” J. Tek. Inform., vol.10, no. 2, pp. 159–168, 2018, doi: 10.15408/jti.v10i2.6994.

E. Yanuarti, D. Wahyuningsih, and F. Fitriyani, “Rekomendasi Kelayakan Peserta Rumah Sehat Baznas-Timah Pangkalpinang Dengan Metode Saw,” NJCA (Nusantara J. Comput. Its Appl., vol. 4, no. 2, p. 136, 2019, doi: 10.36564/njca.v4i2.155.

A. S. Furoida, “SISTEM PENDUKUNG KEPUTUSAN PENERIMA ZAKAT DENGAN METODE SIMPLE ADDITIVE WEIGHTING,” J. Nas. Inform. dan Teknol. Jar., vol. 2, no. 1, pp. 73–78, 2017, doi: 10.1201/b11032-6.

M. Alfaiz and D. Wismarini, “Penggunaan Metode Fuzzy Saw (Simple Additive Weighting) Dalam Sistem Pendukung Keputusan Penentuan Bonus Karyawan (Studi Kasus : Cv. Nugraha Citra Dirgahayu Semarang),” Proceeding SINTAK 2019, pp. 537–544, 2019.

A. E. Silalahi, “SISTEM PENDUKUNG KEPUTUSAN PENENTUAN LOKASI USAHA BARU DENGAN METODE SIMPLE ADDTIVE WEIGTHING ( SAW ) Studi Kasus : ‘ TUPANG ENTERTAIMENT ,’” pp. 1–5, 2017.

R. Wahyuda, S. Andryana, and W. Winarsih, “Algoritma Fuzzy Simple Additive Weighting Sebagai Penunjang Pengambilan Keputusan Untuk Pemilihan Jurusan SMA,” J I M P - J. Inform. Merdeka Pasuruan, vol. 3, no. 2, pp. 61–72, 2018, doi: 10.37438/jimp.v3i2.173.

S. Nurlela, A. Akmaludin, S. Hadianti, and L. Yusuf ,“Penyeleksian Jurusan Terfavorit Pada Smk Sirajul Falah Dengan Metode Saw,” J. Pilar Nusa Mandiri, vol. 15, no. 1, pp. 1–6, 2019, doi: 10.33480/pilar.v15i1.1.

S. Suhada, T. Hidayatulloh, and S. Fatimah, “Penerapan Fuzzy MADM Model Weighted Product dalam Pengambilan Keputusan Kelayakan Penerimaan Kredit di BPR Nusamba Sukaraja ( The Application of Fuzzy MADM Model Weighted Product in Decisions Support of Credit Worthiness in the BPR Nusamba Sukaraja ),” e-ISSN : 2579-9801, vol. VI, pp. 61–71, 2018.

Syafnidawaty, “Multiple Attribute Decision Making (MADM) – UNIVERSITAS RAHARJA.” [Online]. Available: https://raharja.ac.id/2020/04/12/multiple- attribute-decision-making-madm/. [Accessed: 30- Aug-2020].

Febriyanto, E., Naufal, R. S., & budiarty, frizca. (2019). Attitude Competency Assessment in the 2013 curriculum based on elementary school Prototyping methods. IAIC Transactions on Sustainable Digital Innovation (ITSDI), 1(1), 87-96. https://doi.org/10.34306/itsdi.v1i1.6

Sunarya, P. A., Aini, Q., Bein, A. S., & Nursaputri, P. (2019). The Implementation Of Viewboard Of The Head Of Department As A Media For Student Information Is Worth Doing Final Research. ITSDI Journal Edition Vol. 1 No. 1 October 2019, 18.

Yusup, M., Aini, Q., Apriani, D., & Nursaputri, P. (2019, December). PEMANFAATAN TEKNOLOGI BLOCKCHAIN PADA PROGRAM SERTIFIKASI DOSEN. In SENSITIf: Seminar Nasional Sistem Informasi dan Teknologi Informasi (pp. 365-371)

Neelima, E., & Babu, M. P. (2020). Genome feature optimization and coronary artery disease prediction using cuckoo search. Computer Science and Information Technologies, 1(3), 106-115

Ilamsyah, I., Wulandari, R., & Fahreza, R. R. (2020). Web Design Visual Comic Communication As A Visual Based Learning Media. IAIC Transactions on Sustainable Digital Innovation (ITSDI), 2(1), 1-10. https://doi.org/10.34306/itsdi.v2i1.22

Febriyanto, E., & Naufal, R. S. (2019). Attitude Competency Assessment in the 2013 Curriculum Based On Elementary School Prototyping Methods. IAIC Transactions on Sustainable Digital Innovation, 1(1), 87-96.

Downloads

Published

2020-11-19

How to Cite

Nulhakim, L., Andriansyah, . D., & Putri, . F. D. (2020). Model Fuzzy MADM in The Decision Support System of Mustahik Service Program Beneficiaries at Laznas PPPA Daarul Quran Center Tangerang. IAIC International Conference Series, 3(1), 26–37. https://doi.org/10.34306/conferenceseries.v3i1.379